Air Nozzles

AiRTX Air Nozzles Produce More Power at a Fraction of the Cost of Open Copper Tubes or Plastic Nozzles


AiRTX Air Nozzles are uniquely designed to drastically reduce compressed air consumption. The Air Nozzles harness the power of compressed air to do BIG blow-off, cooling and parts ejection jobs, without spewing raw compressed air and noise all over your plant.

They are ideal for anything from a hand-held blow-off gun to multi-unit nozzle manifolds for conveyorized products of transfer lines. Even small air usage applications can show major cost reduction.

Adjustable Air Nozzles
Cut Your Energy Bill! Starting at $14
Adjustable Air Nozzles
Click for Options & Pricing

Fixed Flow Air Nozzles
Powerfull Air Amplification! Starting at $13
Fixed Flow Air Nozzles
Click for Options & Pricing

AiRTX air nozzles generate high volume and thrust with low air consumption. Even small air usage applications can show major cost reduction due to energy savings. Demand on the air compressor is greatly reduced with AiRTX air nozzles, leading to equipment cost savings. AiRTX air nozzles satisfy OSHA requirements for noise as well as dead end pressure.


Watch our 1-minute Air Nozzle Video.

Contact your Electric Company!

They may be offering hard cash for buying AiRTX Air Nozzles to save energy. Duke Energy for example, offers up to $20.00 for each AiRTX Air Nozzle that reduces kWh energy use. Call us for details 800-307-7475 Which Nozzles?
DUKE ENERGY Incentive Table AiRTX Air Nozzles
Description Duke Energy Incentive AiRTX Model #
1/8" NPTF Adjustable High Thrust Jet $20/ unit 38038
1/8" NPTM Adjustable High Thrust Jet $20/ unit 38038E
1/8" NPTF Adjustable High Thrust Jet $20/ unit 38044
1/8" NPTM Aluminum Adjustable Flare Nozzle $20/ unit 48004
1/8" NPTM Rubbertip Nozzle $20/ unit 48006
1/8" NPTM Brass Fixed Flow Air Saver Nozzle $20/ unit 48008
1/8" NPTM Stainless Steel Fixed Flow Air Saver Nozzle $20/ unit 40008
1/8" NPTM Aluminum Adjustable Air Saver Nozzle $20/ unit 48009
1/8" NPTM Stainless Steel Adjustable Air Saver Nozzle $20/ unit 40009
1/8" NPTM Brabed Brass Fixed Flow Air Saver Nozzle $20/ unit 48010
1/8" NPTF Aluminum Hurricane Air Amplifier $20/ unit 15004
1/4" NPTF Aluminum Hurricane Air Amplifier 15008
3/8" NPTF Aluminum Hurricane Air Amplifier $20/ unit 15015
Application Form

Air Nozzle Advantages

  • Cuts energy bill by 50-90%
  • Meets OSHA noise and dead-end pressure requirements.
  • Increase air flow by 50:1
  • Reduce noise level by 50dBA or more.
  • Reduce compressed air usage without losing production.
  • A variety of adjustable, fixed flow styles and thrusts available.
  • Low initial and operating costs
  • Mountable on Sta-Put Hoses, Blow Guns, and Manifold.


Save 50-90% of your electric bill with AiRTX Air Nozzles. Click Here
Conventional Air Movers - Consumption and Costs
Method Size Air Consumption Cost per 1000 Cu.Ft. @ 100 psi
80 psi LPM 100 psi LPM Per Day Per Year
Pipe Nipple 3/8" x 2' 290 8207 350 9905 $41.60 $10,858
Copper Tube 1/4" x 1' 36 1019 42 1189 $5.04 $1,310
Copper Tube 1/2" x 1' 19 5377 240 6792 $28.80 $7,488
Hole in Pipe 1/8" 18 509 22 623 $2.64 $686
Hole in Pipe 1/4" 70 198 86 2434 $10.80 $2,228
AiRTX Model 48009 15 cfm @ 80 psi $1.76 $458

Choose the Nozzle that is best for your particular application.
Call 1-800-307-7475 for an AiRTX Application Engineer

AIR NOZZLES
Why AiRTX Air Amplification Products | More Performance Less Noise | Recommended Air Hoses

Technical
Industrial
Compare
Accessories
FAQ

Adjustable Nozzles

Model 48004

Nozzle Blow-Off Forces in Ounces Of Thrust
Distance from Target Pressure (PSIG)
40 60 80 100
6" 12 16 20 22
12" 11 15 18 21
18" 10 13 16 18

Nozzle is preset to consume 15 cfm @ 80 psi

Model 48009 (Aluminum), Model 40009 (Stainless Steel)


Nozzle Blow-Off Forces in Ounces Of Thrust
Distance from Target Pressure (PSIG)
40 60 80 100
6" 7.7 12.2 16.5 20.6
12" 7.6 11.5 15.9 20.1
18" 6.9 10.0 13.3 16.8

Air Saver Nozzle is preset to consume 15 cfm @ 80 psi

Model 48109


Nozzle Blow-Off Forces in Ounces Of Thrust
Distance from Target Pressure (PSIG)
40 60 80 100
6" 16 24 33 41
12" 15 22 22 40
18" 14 20 27 34

Model 48005

Nozzle Blow-Off Forces in Ounces Of Thrust
Distance from Target Pressure (PSIG)
40 60 80 100
6" 19 34 44 50
12" 17 32 42 48
18" 13 27 38 44
Air Usage CFM 17 24 28 36

Model 48006

Nozzle Blow-Off Forces in Ounces Of Thrust
Distance from Target Pressure (PSIG)
40 60 80 100
6" 4.5 6.1 8 11.6
12" 4 5.7 8.3 11
18" 3.7 5.2 7.5 10.8
Air Usage CFM 6 7 9 11

Model 48007


Nozzle Blow-Off Forces in Ounces Of Thrust
Distance from Target Pressure (PSIG)
40 60 80 100
6" 9 16 21 24
12" 8 15 20 23
18" 6 13 18 21
Air Usage CFM 9 13 15 19

Model 48107


Nozzle Blow-Off Forces in Ounces Of Thrust
Distance from Target Pressure (PSIG)
40 60 80 100
6" 16 24 34 46
12" 14 25 32 40
18" 12 20 28 38
Air Usage CFM 23 28 32 35

Model 48008, 40008, 48010


Nozzle Blow-Off Forces in Ounces Of Thrust
Distance from Target Pressure (PSIG)
40 60 80 100
6" 4.5 6.1 8.0 11.6
12" 4.0 5.7 8.3 11
18" 3.7 5.2 7.5 10.8
Air Usage CFM 6.0 7.0 9.0 11
Technical
Industrial
Compare
Accessories
FAQ

Industrial Solutions for Air Saver Nozzles

Moulding





The Model 48009 Adjustable Air Saver Nozzle uses a minimal amount of compressed air to reduce high volume and cooling for quick part release. Small size and instant on/off make it ideal for molding machines.

Food Industry





The Fixed Flow Nozzle 48005 is ideal for drying food containers prior to labeling. It will not pit or need replacement in this wet environment. Sta-Put Hose Model 40000 series holds Nozzle Model 48005 in place, replacing copper tube.

Drilling - Chip Removal





The 25:1 air amplification of the Model 48008 Fixed Flow Air Saver Nozzle provides plenty of cleaning power for a factory air gun, while still meeting OSHA requirements for dead-end pressure and noise limits.

Uses for AiRTX Nozzles

Use Them For
  • Replacing direct compressed air use pipe nipples and copper tube
  • Ejecting parts from molding machines and stamping presses
  • Blow-off of chips, trim scrap, swarf
  • Part cleaning before painting
  • Plant air conservation and noise reduction
  • Cooling molded or cast parts
  • Cleaning/cooling of metal strip and plastic/paper webs
  • Cleaning/cooling of conveyorized or transfer line parts
  • Manifolds available for multiple units
Stainless Steel Air Saver Nozzles are Ideal for
  • Food processing
  • Hot corrosive environments
  • Maximum durability in harsh environments
AiRTX Air Saver Nozzles Advantages
  • Generates high volume with lowest possible air consumption
  • Adjustability makes them easy to adapt to existing applications and immediately cut air use to a minimum for the job
  • Greatly reduces demand on the compressor
  • Low initial and operating costs
  • Meets OSHA noise and dead-end pressure requirements
  • Easy to control flow/force
  • Longer stream of high velocity air
  • Adjustable air flow
  • Set screw for locking air usage
The Hurricane Line of Nozzles provide the benefits of the AiRTX Nozzles but have greater thrust when power is needed for moving heavy objects, removing large amounts of liquids from parts in a short time, and larger air flows for quicker drying.


Technical
Industrial
Compare
Accessories
FAQ
Nozzle Model Material Air Inlet Fixed Flow
Adjustable
Description Air Consump
40psi
Air Consump
80psi
Air Flow Amp
40psi
Air Flow Amp
80psi
Ozs of Thrust
40psi
Ozs of Thrust
80psi
38038 Brass 1/8 NPTF Adjustable High Thrust Jet 6 cfm 15cfm 24cfm 60cfm 7.5 16.5
38038E Brass 1/8 NPTM Adjustable High Thrust Jet 6 cfm 15cfm 24cfm 60cfm 7.5 16.5
38044 Brass 1/8 NPTM Adjustable In-Line High Thrust Jet 6 cfm 15cfm 24cfm 60cfm 7.5 16.5
38050-1 Aluminum 1/4 NPTF Adjustable 2" Wedge 16 cfm 28cfm 400cfm 70cfm 20 34
38054-1 Aluminum 1/4 NPTF Adjustable 4" Wedge 32 cfm 56cfm 800 cfm 1400cfm 40 68
40009 Stainless 1/8 NPTM Adjustable Air Saver Nozzle 10 cfm 15cfm 250cfm 375cfm 7.7 16.5
48004 Aluminum 1/8 NPTM Adjustable Flare Nozzle 10 cfm 15cfm 250cfm 375cfm 7.7 16.5
48009 Aluminum 1/8 NPTM Adjustable Air Saver Nozzle 10 cfm 15cfm 250cfm 375cfm 7.7 16.5
48109 Aluminum 1/2 NPTM Adjustable Hurricane Air Saver Nozzle 10 cfm 15cfm 800cfm 1400cfm 14 30
30050 Stainless 1/4 NPTM Fixed Flow 2" Wedge 16 cfm 28cfm 400cfm 700cfm 20 34
30054 Stainless 1/4 NPTM Fixed Flow 4" Wedge 32 cfm 56cfm 800cfm 1400cfm 40 68
30150 Stainless 1/4 NPTM Fixed Flow 2" Wedge 29 cfm 50cfm 725cfm 1250cfm 46 78
30154 Stainless 1/4 NPTM Fixed Flow 4" Hurricane Wedge 58 cfm 100cfm 1450cfm 2500cfm 92 156
38050 Aluminum 1/4 NPTM Fixed Flow 2" High Thrust Wedge 16 cfm 28cfm 400cfm 700cfm 20 34
38054 Aluminum 1/4 NPTM Fixed Flow 4" Wedge 32 cfm 56cfm 800cfm 1400cfm 40 68
38150 Aluminum 1/4 NPTM Fixed Flow 2" Hurricane Wedge 29 cfm 50cfm 725cfm 1250cfm 46 78
38154 Aluminum 1/4 NPTM Fixed Flow 4" Hurricane Wedge 58 cfm 100cfm 1450cfm 2500cfm 92 156
40005 Stainless 1/4 NPTF Fixed Flow Hurricane Air Saver Force Nozzle 22 cfm 30cfm 550cfm 750cfm 24 45
40007 Stainless 1/4 NPTF Fixed Flow Air Saver Force Nozzle 9 cfm 15cfm 2225cfm 375cfm 9 21
40008 Stainless 1/8 NPTM Fixed Flow Fixed Flow Air Saver Nozzle 6 cfm 9cfm 150cfm 225cfm 4.5 9
40107 Stainless 1/2 NPTF Fixed Flow Hurricane Air Saver Force Nozzle 15 cfm 32cfm 375cfm 800cfm 16 34
48005 Aluminum 1/4 NPTF Fixed Flow Hurricane Air Saver Force Nozzle 22 cfm 30cfm 550cfm 750cfm 24 45
48006 Brass/Rubber 1/8 NPTM Fixed Flow Rubber Tip Nozzle 6 cfm 9cfm 150cfm 225cfm 4.5 8
48007 Aluminum 1/4 NPTF Fixed Flow Air Saver Force Nozzle 9 cfm 15cfm 2225cfm 375cfm 9 21
48008 Brass 1/8 NPTM Fixed Flow Air Saver Nozzle 6 cfm 9cfm 150cfm 225cfm 4.5 9
48010 Brass Barbed Fixed Flow Barbed Air Saver Nozzle 6 cfm 9cfm 150cfm 225cfm 4.5 9
48107 Aluminum 1/2 NPTF Fixed Flow Hurricane Air Saver Force Nozzle 15 cfm 32cfm 375cfm 800cfm 16 34
Technical
Industrial
Compare
Accessories
FAQ

Frequently Asked Questions

What is the CFM of the Nozzles?

Please check the comparison chart for consumption at 40 psi and 80 psi.

How is the airflow increased?

The high speed compressed air exits the nozzle from the hex and creates a low pressure area as the compressed air flows down the conical tip. This low pressure area draws into the surrounding air to provide more volume of air in the entrained flow.

Call Us for Free Technical Support! 1-800-307-7475 or contact us

Technical
Industrial
Compare
Accessories
FAQ