Drum Devil & Drum Devil II
Drum Devil & Drum Devil II 

Drum Devil - The Ultimate Wet Vac

Spill Pick-Up: The AiRTX Drum Devil 90600 suction pump operates in conjunction with your standard drum and factory compressed air. Drum Devil Model 90600 Squeegee operation works on smooth or rough surfaces.

Drum Devil II - Two-way Liquid Transfer and Spill Cleanup

The Model 90650 both fills and/or empties a 55 gallon drum in less than 2 minutes. Easily switches from vacuum mode, filling the container, to empty mode by turning knob on top of unit, and inserting the exhaust tube in the drum.
SmartVac
SpeedVac
HopperVac

Call Us With Your Application
1-800-307-7475

Choose the Smart Clean Up System that is best for your particular application
Call 1-800-307-7475
AiRTX Application Engineer

Technical
Industrial
Compare
Accessories

Drum Devil Technical Data

Drum Devil & Drum Devil II Specifications
Specifications Drum Devil 90600
Recommended Usage: Spill Pick-up/Liquid
Operating psi Range: 80-100 psi
Noise Level: 78 dBA
Vacuum Capabilities 8.5 HG @ 80 psi
Gallon of Water Pick-up/Min. 33 gpm
Range of Pick-up Materials Water to Wet Sludge
Throat Size/Diameter 1.5"
Air Consumption 28 cfm @ 80 ps
1. OPERATING INSTRUCTIONS
The AiRTX Drum Devil Model 90600 suction pump operates in conjunction with a standard drum and factory compressed air. The Drum Devil operates by passing near sonic air through a .002" annular orifice, creating a vacuum of 8.5 Hg @ 80 psi within the drum. It is recommended that the Drum Devil only be used with steel drums which are in good condition.

2. SET-UP OF DRUM DEVIL MODEL 90600
A. Thread the Drum Devil stem into the 3/4" threaded opening on the drum. B. Thread the 2" threaded plug fitting into the larger threaded opening on the drum. C. Hook up a regulated 3/8" or 1/2" air line to the 1/4 NPT ball valve located on the Drum Devil. To prevent line debris from interfering with pump performance, an air line filter is recommended. AiRTX Air Filter Model 90175 can be used with the Drum Devil Model 90600. D. Insert the 90 Hose Cam cuffed hose securely over the plug fitting now located on the drum. For liquid transfer insert the free end of the hose, with or without attachments, into the liquid to be vacuumed and turn on the air supply, regulated to a working pressure between 70 and 90 psi. A float valve located on the bottom of the Drum Devil will automatically shut off the unit when the drum is full. The ball valve on the Drum Devil may also be used to turn off the unit at any time during operation. E. For wet chip pick up, insert the wand, crevice tool, brush, or skimmer onto the end of the wands. The squeegee tool can be used to pick up liquids from floor areas. Press down and push the squeegee tool away from you to quickly pick up liquid spill.

CAUTION
IT IS NOT RECOMMENDED TO USE THE DRUM DEVIL MODEL 90600 WITH FLAMMABLE LIQUIDS SINCE A STATE OF VACUUM MAY LOWER THE FLASH POINT. DO NOT USE WITH PLASTIC DRUM - ONLY GOOD CONDITION METAL DRUMS AS IMPLOSION OF THE DRUM WILL OCCUR
Technical
Industrial
Compare
Accessories

Uses for AiRTX Drum Devil

Use Them For
  • Spill Pick-up
  • Liquid transfer, fills 55 gallon barrel under 2 minutes
  • Portable vacuum operations
  • Cleaning sumps and sludge
AiRTX Drum Devil Advantages
    Beats shop vacuums on reliability, performance, and price
  • Larger tank capacity than industrial shop vacuums
  • Eliminates double handling of toxic material and emptying vac canister
  • Eliminates need for "floor dry" absorbent
  • No efficiency loss after each use like electric-powered shop vacuums
  • Made of stainless steel
  • Has an automatic float valve to prevent overfilling
  • Easily picks up high viscosity liquids, chips & sludge
  • Safe in wet areas requiring no electricity
Technical
Industrial
Compare
Accessories
Speed vac SmartVac Drum Devil Drum Devil II
Kit Model No. 90400 90755 90600 90650
Recommended Usage Dry Pick Up/ Blow Gun Dry Pick Up/Spill Pick Up Spill Pick Up/Empty & Fill Spill Pick Up/Liquid
Operating PSI Range 80-120 PSI 80-120 PSI 80-100 PSI 80-100 PSI
Noise Level 80 dBA 80 dBA 78 dBA 78 dBA
Vacuum Capabilities 2.5 HG@ 80PSI 4.0 HG@ 80PSI 8.5 HG@ 80PSI 8.5 HG@ 80PSI
Gallon of Water Pick Up/Min. Floor Spills 33 gpm 33 gpm
Range of PickUp Materials Dry Mat. to Wet Chips Dry Mat. to Heavy Oil Spills Water to Wet Sludge Water to Wet Sludge
Throat Size/Dia. 1" 1.25" 1 1/2" hose 1 1/2" hose
Air Consumption 18 @ 80 PSI 30 @ 80 PSI 28 @ 80 PSI 28@ 80 PSI
Product Part # Only 90401 90755-1 90600-1 90651
Accessories
90751 SmartVac Air Filters-Package of Three
90700-1 SmartVac 55 Gallon Cover
(Flange, Lockring & Bag)
90700-3 8 3/8" Flange for SmartVac
90700-11 Vacuum Gauge/Valve Assembly Vacuum Gauge/Valve Assembly Vacuum Gauge/Valve Assembly
90700-7 55 Gallon Lock Ring
90700-9 Aluminum Double Flange Squeezee
90700-10 Aluminum Double Bend
2-piece Extension Wand
90720 Round Steel Dolly w/ Steel Casters
90402 10 ' x 1 1/4" Gray Smooth Wall Hose
90403 19" Pick-Up Wand 19" Pick-Up Wand 19" Pick-Up Wand 19" Pick-Up Wand
90404 Round brush Round brush
90405 Crevice Tool Crevice Tool Crevice Tool Crevice Tool
90407 Skimmer Skimmer Skimmer Skimmer
90410 3 Gallon Reusable Cloth Bag
90411 11" Pick-Up Wand 11" Pick-Up Wand 11" Pick-Up Wand
90412 5 Gallon reusable Cloth Drum Cover
w 1 1/4" Hose Connection and Clamp
90500-13 Squeezee Squeezee
90500-14 10 x 1 1/2" Black Smooth Wall Hose 10 x 1 1/2" Black Smooth Wall Hose 10 x 1 1/2" Black Smooth Wall Hose
90500-15 Liquid Exhaust Tube
90500-16 2" Drum Connection Plug 2" Drum Connection Plug
90500-17 Locking Hose Cam Locking Hose Cam
Technical
Industrial
Compare
Accessories

Model Description Unit Price Order
90600
Drum Devil Kit: 10' Hose, Drum Devil, 2 Wands, 2" Cam and Plug Drum Adapter, Crevice Tool, skimmer and Squeegee

$461.00  

+
90600-1
Drum Devil Only

$337.00  

+
90650
Drum Empty or Fill Kit; 10' x 1 1/2" Hose, Two 19" Pick-up Wands, 2" Cam and Plug drum adapter, Liquid Drain Tube, Crevice Tool, Skimmer, Squeegee, Pressure Guage and On/Off Valve

$536.00  

+
90651
Drum Devil II

$439.00  

+
Add to cart