In ducted applications, Air Amplifiers deliver amplification ratios of 12-25:1, capable of producing output flows of 100 to 2000 SCFM (2800-56,000 SLPM), using the factory-set nozzle opening (which you can change). Unducted amplification ratios range from 36-75:1.

Use Model 15008R and Model 15015R on the suction end for in-line conveying applications

Adjustable Air Saver Nozzles
Fixed Flow Air Saver Nozzles
Wedges
High Thrust Jets
Hurricane Air Amplifiers
Gate Air Wipe
Air Knives

Call Us With Your Application
1-800-307-7475

Air Amplifiers Technical Data

The AiRTX Hurricane Adjustable Air Amplifiers releases a tiny amount of compressed air at near-sonic velocity through an adjustable, internal, ring-shaped nozzle. The high-speed "tube" of air released through the front creates a strong vacuum behind itself, pulling additional surrounding air through the rear of the amplifier, while pushing the ambient air in front.

15008, 15015 Flow Pattern

15025, 15030 Flow Pattern

Air Amplifier Dimensions
Model	A	B	C	D	E	Dia.
15004	0.50"	1.25"	2.175"	.560"	1/8" NPT	.38"
10004	13mm	31mm	56mm	14mm		9mm
15008	1.250"	2.00"	2.625"	1.02"	1/4" NPT	0.80"
10008	31mm	50mm	67mm	26mm		20mm
15015	2.00"	3.00"	3.25"	1.06"	3/8" NPT	1.65"
10015	50mm	76mm	83mm	27mm		41mm
15025	2.5"	3.7"	3.7"	1.2"	3/8" NPT	2.25"
10025	63mm	93mm	93mm	30mm		57mm
15030	4.00"	5.00"	5.00"	1.50"	1/2" NPT	3.00"
	101mm	127mm	127mm	38mm		76mm

Air Amplifier Flow Specs at Factory (Adjustable) Setting
SS Model#	Aluminum Model #	Throat Diameter	AMP Ratio	Adj. Factory Setting
10004	15004	0.38"	12.1	15 cfm
10008	15008	0.8"	12.1	15 cfm
10015	15015	1.5"	20.1	25 cfm
10025	15025	2.5"	25.1	45 cfm
	15030	3	30.1	60 cfm

Industrial Applications for Air Amplifiers

Metalworking - Grinding
	A model 15015 Air Amplifier boosts a vacuum system by 300 SCFM, negating the need for a larger, more expensive system to remove grinding dust.
Woodworking - Sawdust Removal
	Model 15008 Amplifier boosts the vacuum system, ending a sawdust problem on this router. Compressed-air-operated, with no moving parts, the amplifier eliminates frequent electric motor replacement.
Coolant Mist Removal
	Even with doors closed, oily mist often escapes to surrounding areas. The model 15008 Air Amplifier solves the problem, without failure of electric motors or expensive vacuum systems.
Extrusion - Rubber Molding Cooling/Drying
	Model 10015 Stainless Steel Amplifiers help set-up and cool this molding after extrusion. Then, they blow off and dry the molding prior to cutting.

Uses for AiRTX Air Amplifiers

Use Them For

Air conveying any material that can be moved in a rush of air: chips, sawdust, smoke, paper and cloth trim, grain, dust, capsules, powder
Ventilation and exhaust of smoke/fumes, replacing fans
Blow-off chips, trim scrap, water, dust
Part cleaning before finishing, replacing open air lines
Purging tanks
Cooling molded parts and cast-ings
Cleaning/cooling of conveyed parts
Pneumatic conveying

AiRTX Air Amplifiers

Low cost
Greatly reduced noise
Easy to control flow/force
Adjustable output without tools or shims
No blades, guards or clumsy duct
No maintenance, no moving parts
No electricity or explosion hazard
Instant on/off
Available in Stainless and Aluminum

Model

Description

Unit Price

Order

Aluminum

15004

3/4" (19.5mm) Aluminum Air Amplifier

$55.00

15008

1 1/4" (32mm) Aluminum Air Amplifier

$103.00

15015

2" (51mm) Aluminum Air Amplifier

$132.00

15025

2.5" (64mm) Aluminum Air Amplifier

$281.00

15030

4" (102mm) Aluminum Air Amplifier

$362.00

Aluminum w/ Filter

15108

1 1/4" (32mm) Aluminum Air Amplifier w/ Filter #90190

$176.00

15115

2" (51mm) Aluminum Air Amplifier w/ Filter #90190

$195.00

15125

2.5" (64mm) Aluminum Air Amplifier w/ Filter #90190

$344.00

15130

4" (102mm) Aluminum Air Amplifier w/ Filter #90200

$445.00

Aluminum w/ Filter and Regulator

15208

1 1/4" (32mm) Aluminum Air Amplifier w/ Filter & Regulator #90230

$215.00

15215

2" (51mm) Aluminum Air Amplifier / filter & regulator #90230

$238.00

15225

2.5" (64mm) Aluminum Air Amplifier / filter & regulator #90230

$390.00

15230

4" (102mm) Aluminum Air Amplifier / filter & regulator #90225

$536.00

Stainless Steel

10004

3/4" (19.5mm) Stainless Steel Air Amplifier

$221.00

10008

1 1/4" (32mm) Stainless Steel Air Amplifier

$257.00

10015

2" (51mm) Stainless Steel Air Amplifier

$302.00

10025

2.5" (64mm) Stainless Steel Air Amplifier

$708.00

Stainless Steel w/ Filter

10030

4" (102mm) Stainless Steel Air Amplifier

$1085.00

10108

1 1/4" (32mm) Stainless Steel Air Amplifier w/ Filter #90190

$312.00

10115

2" (51mm) Stainless Steel Air Amplifier w/ Filter #90190

$365.00

10125

2.5" (64mm) Stainless Steel Air Amplifier w/ Filter #90190

$758.00

Stainless Steel w/ Filter and Regulator

10208

1 1/4" (32mm) Stainless Steel Air Amplifier w/ Filter and Regulator #90235

$367.00

10215

2" (51mm) Stainless Steel Air Amplifier w/ Filter and Regulator #90235

$411.00

10225

2.5" (64mm) Stainless Steel Air Amplifier w/ Filter and Regulator #90235

$804.00

Add to cart

PRODUCT SEARCH ORDER ONLINE ACCESSORIES VIDEOS CONTACT US
PRIVACY STATEMENT / TERMS & CONDITIONS / ADD TO FAVORITES / SIGN UP FOR EMAIL / FAQ / NEWS / COMPANY / SITE MAP

Air Amplifiers Technical Data

15008, 15015 Flow Pattern

15025, 15030 Flow Pattern

Industrial Applications for Air Amplifiers

Metalworking - Grinding

Woodworking - Sawdust Removal

Coolant Mist Removal

Extrusion - Rubber Molding Cooling/Drying

Uses for AiRTX Air Amplifiers