Ionizing Air Knife Series 55500
Ionizing Air Knife Series 55500 

Eliminates static up to 20 feet



The halo configuration of these Ionizing Air Knives (Model 55500 Series) provides complete surface coverage of the casket lid for optimum static neutralization and cleaning before paint operation.
Ionizing Bar
Single Point Ionizing Nozzle
Ionizing Air Gun
Power Supply

Call Us With Your Application
1-800-307-7475

Eliminate static problems with AiRTX Static Elimination products for your particular application. Safe and easy to use, these industrial strength products produce the highest output of any other units in the industry.
Technical
Industrial
Compare
Accessories

Ionizing Air Knives Technical Data

The AiRTX Air Knife provides a smooth laminar flow of air which doesn't have the turbulence of fan-driven air and can carry positive and negative ions up to 20 feet from the bar and provide neutralization within the 2 second lifetime of the ions. The turbulence created by a fan causes the ions to bump into each other, so that the distance of ionization is reduced to 10" - 12".

The last digit of the part number indicates the effective length of the unit.

Sample: Model 55012 Ionizing Bar is 12" long.
Sample: Model 85012 Air Knife is 12" long

Installing Ionizing Bars

Correct Positioning is Vital to the Efficient Operation of Static Elimination Bars. Factors to be considered are:
  1. Correct positioning relative to the problem, i.e., immediately before problem area, with no intermediary rollers or processes which could regenerate the charge.
  2. Speed of material—higher speeds require more static elimination.
  3. Conductivity and density of material. The less conductive or more dense (molecularly) the material, the more stubborn will be the charge.
  4. Grounding—vitally important to the correct operation of bars. They will not function and will become "live" if not properly grounded.
The Following Rules Should Be Observed When Installing AiRTX Ionizing Bars
  • Optimal Distance from material to be neutralized is 2" - 4"
  • Bars should be staggered if positioned on opposite sides of the material—distance between bars should not be less than the distance of either bar to surface (2" - 4")
  • Avoid proximity to grounded parts of the machine – Grounded objects will distort the corona and reduce its efficiency.
  • CAUTION: This equipment is NOT to be used in hazardous vapor areas.
Technical
Industrial
Compare
Accessories

Industrial Applications for Air Knives


Electronics




Ionizing Air Knives arranges in a halo configuration, quickly neutralize static, then remove lint and dust from these PC Housings, improving handling and appearance.

Packaging




Static was causing packaging jams and wasted valuable production time, until two Model 55412 Ionizing Air Knives were installed in this heat sealing process. Low pressure, ionized air eliminates the static charge and allows greatly increased line speed.

Food Processing




Static build-up on the plastic roll on this food packaging machine slowed production speed and caused shocks to employees. The Ionizing Air Knife can stop this problem in all types of plastic and paper roll or sheet stock.

Uses for AiRTX Ionizing Air Knives

Use Them For
  • PC board cleaning
  • Automatic feeder
  • Sheet cleaning
  • Facia cleaning before painting
  • Blow molding
  • Debris removal
  • Injection molding
  • Parts cleaning
  • Web handling
AiRTX Ionizing Air Knives Advantages
  • More power from 7500V power source
  • Anodized aluminum case
  • Neutralizes static, blows away dirt
  • Minimal compressed air, where used at all
  • Adjustable air flow
  • Shockless, non-radioactive neutralization source
  • Low maintenance
  • Quiet
  • Rugged, reliable for industrial use
  • Indicator light on Ionizing Bar to show power
Technical
Industrial
Compare
Accessories
Technical
Industrial
Compare
Accessories

Model Description Unit Price Order
55503
 3 in. Ionizing Bar w/ Air Knife

$231.00  

+
55506
 6 in. Ionizing Bar w/ Air Knife

$276.00  

+
55512
 12 in Ionizing Bar w/ Air Knife

$346.00  

+
55518
 18 in. Ionizing Bar w/ Air Knife

$416.00  

+
55524
 24 in. Ionizing Bar w/ Air Knife

$466.00  

+
55530
 30 in. Ionizing Bar w/ Air Knife

$551.00  

+
55536
 36 in. Ionizing Bar w/ Air Knife

$636.00  

+
55542
 42 in. Ionizing Bar w/ Air Knife

$716.00  

+
55548
 48 in. Ionizing Bar w/ Air Knife

$811.00  

+
55403
 3" Ionizing Bar w/ Air Knife with 6000V (2) Outlet Power Supply and Air Filter #90190

$531.00  

+
55406
 6" Ionizing Bar w/ Air Knife with 6000V (2) Outlet Power Supply and Air Filter #90190

$586.00  

+
55412
 12" Ionizing Bar w/ Air Knife with 6000V (2) Outlet Power Supply and Air Filter #90190

$646.00  

+
55418
 18" Ionizing Bar w/ Air Knife with 6000V (2) Outlet Power Supply and Air Filter #90200

$731.00  

+
55424
 24" Ionizing Bar w/ Air Knife with 6000V (2) Outlet Power Supply and Air Filter #90200

$791.00  

+
55430
 30" Ionizing Bar w/ Air Knife with 6000V (2) Outlet Power Supply and Air Filter #90200

$866.00  

+
55436
 36" Ionizing Bar w/ Air Knife with 6000V (2) Outlet Power Supply and Air Filter #90185

$971.00  

+
Add to cart

Airtx International
PRODUCT SEARCH ORDER ONLINE ACCESSORIES VIDEOS CONTACT US
PRIVACY STATEMENT / TERMS & CONDITIONS / ADD TO FAVORITES / SIGN UP FOR EMAIL / FAQ / NEWS / COMPANY / SITE MAP