Your browser does not support JavaScript
Shopping Cart
0  |  $0.00
Login  |  
   
 

DRUM DEVIL SYSTEMS TECHNICAL DATA

Drum Devil Systems > Solutions > Technical Data

Drum Devil & Drum Devil II Specifications
Specifications Drum Devil 90600
Recommended Usage:
Spill Pick-up/Liquid
Operating psi Range:
80-100 psi
Noise Level:
78 dBA
Vacuum Capabilities
8.5 HG @ 80 psi
Gallon of Water Pick-up/Min.
33 gpm
Range of Pick-up Materials
Water to Wet Sludge
Throat Size/Diameter
1.5"
Air Consumption
28 cfm @ 80 ps

Drum Devil Technical Data1. OPERATING INSTRUCTIONS

The AiRTX Drum Devil Model 90600 suction pump operates in conjunction with a standard drum and factory compressed air. The Drum Devil operates by passing near sonic air through a .002" annular orifice, creating a vacuum of 8.5” Hg @ 80 psi within the drum. It is recommended that the Drum Devil only be used with steel drums which are in good condition.

2. SET-UP OF DRUM DEVIL MODEL 90600

A. Thread the Drum Devil stem into the 3/4" threaded opening on the drum. B. Thread the 2" threaded plug fitting into the larger threaded opening on the drum. C. Hook up a regulated 3/8" or 1/2" air line to the 1/4” NPT ball valve located on the Drum Devil. To prevent line debris from interfering with pump performance, an air line filter is recommended. AiRTX Air Filter Model 90175 can be used with the Drum Devil Model 90600. D. Insert the 90° Hose Cam cuffed hose securely over the plug fitting now located on the drum. For liquid transfer insert the free end of the hose, with or without attachments, into the liquid to be vacuumed and turn on the air supply, regulated to a working pressure between 70 and 90 psi. A float valve located on the bottom of the Drum Devil will automatically shut off the unit when the drum is full. The ball valve on the Drum Devil may also be used to turn off the unit at any time during operation. E. For wet chip pick up, insert the wand, crevice tool, brush, or skimmer onto the end of the wands. The squeegee tool can be used to pick up liquids from floor areas. Press down and push the squeegee tool away from you to quickly pick up liquid spill.

CAUTION
IT IS NOT RECOMMENDED TO USE THE DRUM DEVIL MODEL 90600 WITH FLAMMABLE LIQUIDS SINCE A STATE OF VACUUM MAY LOWER THE FLASH POINT. DO NOT USE WITH PLASTIC DRUM - ONLY GOOD CONDITION METAL DRUMS AS IMPLOSION OF THE DRUM WILL OCCUR

 
Options & Pricing
Solutions
 

SERVICES

 

CONTACT US

 

FOLLOW US

AiRTX INTERNATIONAL
6320 Wiehe Road, Cincinnati,
Ohio 45237, USA
Follow us on Facebook
Follow us on LinkedIn
Subscribe to us on YouTube
Follow us on Google+
Blog
COPYRIGHT © 2019. AiRTX INTERNATIONAL. ALL RIGHTS RESERVED